Rock Shox O-Rings specs

[Guest Smimby]

Does anyone know where you can find the manual that gives you the sizes for the o-rings used in RockShox Reba for example....

 

I am sure that I can find them cheaper than buying the "seal-kit" from sram dealers just need to get the correct sizes

[droo]

Once you've factored in the mission to the o-ring supplier it comes out about the same. It's the wipers that cost you. But for what it's worth, you're looking for:

 

2 x 2-120 (topcaps)

1 x 2-119 (rebound seal head ext)

1 x 2-118 (compression damper foot)

1 x 2-212 (air piston)

1 x 2-211 (air spring seal head ext)

1 x 2-206 (rebound seal head int)

1 x 10.0 x 3.0mm (air spring seal head int)

1 x 7.0 x 1.5mm (rebound adjuster seal)

2 x 4.0 x 2.0mm (valve cap seals)

 

The only place you'll find a comprehensive list for all the seals used in all the forks you can think of is the Barnett Bicycle Manual, and for that you've got to do a course in the US that costs about R 30k.

[Guest Smimby]

Once you've factored in the mission to the o-ring supplier it comes out about the same. It's the wipers that cost you. But for what it's worth, you're looking for:

 

2 x 2-120 (topcaps)

1 x 2-119 (rebound seal head ext)

1 x 2-118 (compression damper foot)

1 x 2-212 (air piston)

1 x 2-211 (air spring seal head ext)

1 x 2-206 (rebound seal head int)

1 x 10.0 x 3.0mm (air spring seal head int)

1 x 7.0 x 1.5mm (rebound adjuster seal)

2 x 4.0 x 2.0mm (valve cap seals)

 

The only place you'll find a comprehensive list for all the seals used in all the forks you can think of is the Barnett Bicycle Manual, and for that you've got to do a course in the US that costs about R 30k.

Thanks very much

[Guest Smimby]

Once you've factored in the mission to the o-ring supplier it comes out about the same. It's the wipers that cost you. But for what it's worth, you're looking for:

 

2 x 2-120 (topcaps)

1 x 2-119 (rebound seal head ext)

1 x 2-118 (compression damper foot)

1 x 2-212 (air piston)

1 x 2-211 (air spring seal head ext)

1 x 2-206 (rebound seal head int)

1 x 10.0 x 3.0mm (air spring seal head int)

1 x 7.0 x 1.5mm (rebound adjuster seal)

2 x 4.0 x 2.0mm (valve cap seals)

 

The only place you'll find a comprehensive list for all the seals used in all the forks you can think of is the Barnett Bicycle Manual, and for that you've got to do a course in the US that costs about R 30k.

 

 

Forgot to ask if this is for the Dual air Reba?

[droo]

They're all the same, unless you've got a U-Turn or a Dual Position spring.

[Soufflé]

ISO ref sizing

O-Rings Sizes ISO No.pdf