Vangar Posted October 10, 2014 Share So crisis. One of the o rings on my Stans 3.30 hubs has split. Anyone have an idea of what size the o ring is or where in jhb i can get a replacement? Link to comment Share on other sites More sharing options...
JXV Posted October 10, 2014 Share http://www.notubes.com/Stans-Hub-Parts-C44.aspx If you pull out the old O ring and take it to a bearing/seal place they will match it up for you even if broken. Buy a few spares while you are there. Link to comment Share on other sites More sharing options...
Tedster Posted October 10, 2014 Share One of mine also damaged on the front wheel, should be able get one at bearing man. We have a bag with a lot of o rings in, used one of them not exactly the same size, but works fine. Link to comment Share on other sites More sharing options...
straatvark Posted October 10, 2014 Share I asked stans. It is 2mm*25mm and got today from Bearing Man. Stil a bit loose so I bought 24*2.5 as well to play with. Pity you are in Gauteng. I got loads spare now... Link to comment Share on other sites More sharing options...
straatvark Posted October 10, 2014 Share If really urgent: I used a thicker one from the coop temporary. It fid not go in, but cut the outer slice of by sliding a boxcutter around the aluminum Link to comment Share on other sites More sharing options...
Vangar Posted October 10, 2014 Share Thehub to the rescue. Thanks everybody. The current one is still in but just want to keep water out. Thanks a lot! Link to comment Share on other sites More sharing options...
straatvark Posted October 10, 2014 Share Mine was used while splitted for 3-4 dry rides. No problems... Link to comment Share on other sites More sharing options...
straatvark Posted October 10, 2014 Share Ok. You made me get up in install them. The 24 * 2.5mm is to thick. It is 25*2mm. Still loose and need to be very carefull when pressing it in. I bought 10 spare. Very cheap. .. Link to comment Share on other sites More sharing options...
David Marshall Posted October 10, 2014 Share You can use superglue on the broken one as a stop gap. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.